Bowhead / UIC Technical Services
Overviewowhead is seeking a senior level Machinist to support the Army Research Laboratory (ARL) on Aberdeen Proving Ground (APG).
ResponsibilitiesRead drawings and sketches provided by technical points of contact, independently set-up machine tools, prepare parts/materials and hardware, fabricate components, thoroughly clean/deburr, and assemble items as required.
Proficiently generate machine codes from the sketches/drawings to operate the Computer Numerically Controlled (CNC) mill and lathe to manufacture parts.
Independently and proficiently set up and operate a fourth axis unit on the CNC and manual mills, lathes, Bridgeport's, drill presses, belt sanders, grinders.
Conduct manual Machining prototype work.
Set up and consistently and accurately program Mazak machine mills and lathes.
Without direct supervision, able to manufacture necessary tooling, jigs, and fixtures and can perform cylindrical grinding.
Work efficiently and hold very close tolerances (+/-.
005 ) as a minimum for the lowest level requirement, and (+/-.
0001) for higher level fabrications.
Select or adapt standard procedures or equipment, using fully applicable precedents.
Fabricate specialized tooling for unique machining operations.
Construct components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions.
Receive initial instructions, equipment requirements, and advice from supervisor or engineer as needed.
Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment.
Extract and compile a variety of engineering data from field notes, manuals, lab reports; process data, identifying errors or inconsistencies, selecting methods of data presentation.
Provide recommendations for improving operations by recommending new equipment, methods, or materials for accomplishment of tasks, consistent with applicable regulatory guidance and safety SOPs.
Provide guidance to Engineers and Machinist in machining principles and order of operations.
Provide technical support for engineers working in such areas as research, design, development, testing, or manufacturing process improvement.
QualificationsHigh School diploma or equilvalent is required at a minimum.
Must be able to operate and maintain conventional lathes and machinery.
Proficiency in the use of SolidCAM Software to program test items.
Perform assignments that are not completely standardized or prescribed.
Basic to Intermediate level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPointAbility to communicate effectively with all levels of employees and outside contactsStrong interpersonal skills and good judgment with the ability to work alone or as part of a teamMust maintian certification/license to operate Bowhead and Government vehiclesPhysical Demands:
Must be able to lift up to 50 pounds repetitivelyMust be able to stand and walk for prolonged amounts of timeMust be able to twist, bend and squat periodicallySECURITY CLEARANCE REQUIREMENTS:
Must be able to obtain a security clearance at the Secret level.
US Citizenship is a requirement for Secret clearance at this location.
#LI-DNI
Benefits:
Long Term Disability, Medical, Dental and Vision, Military Leave, Paid Holidays, Professional Development, Tuition Reimbursement, 401K, Employee Referral Program, Flexible Spending Accounts, Life InsuranceAbout the Company:
Bowhead / UIC Technical ServicesUIC Government Services (UICGS) and its Bowhead family of companies are a division of Ukpeagvik I upiat Corporation (UIC), an Alaskan Native Corporation (ANC).
UIC is one of the largest ANC's in Alaska, and combined with UICGS/Bowhead, we offer a wide variety of services to defense and civilian government agencies that reach across multiple disciplines, the U.
S.
, and the world.
With our excellent management team and great range of services in the areas of Information Technology, Logistics & Marine, Manufacturing & Products, Program Management and Operations, and Systems & Technology, we perform over 250 contracts worldwide with innovative business solutions in areas such as engineering, maintenance services, manufacturing, information technology, program support, logistics/base support, and procurement.
Collectively, our 3,500
employees of the Bowhead family of companies, UIC, UIC Government Services, UIC Government Construction, and UIC Commercial remain committed to delivering quality results to ensure our customers' success.
Headquartered in Virginia, we are a fast-growing, multi-million-dollar corporation consistently recognized as one of the top 25 8(a) certified small business companies for government contracting.
Company Size:
2,500 to 4,999 employeesIndustry:
Real Estate/Property ManagementFounded:
1999Website:
https:
//www.
bowheadsupport.
com/.
Estimated Salary: $20 to $28 per hour based on qualifications.
ResponsibilitiesRead drawings and sketches provided by technical points of contact, independently set-up machine tools, prepare parts/materials and hardware, fabricate components, thoroughly clean/deburr, and assemble items as required.
Proficiently generate machine codes from the sketches/drawings to operate the Computer Numerically Controlled (CNC) mill and lathe to manufacture parts.
Independently and proficiently set up and operate a fourth axis unit on the CNC and manual mills, lathes, Bridgeport's, drill presses, belt sanders, grinders.
Conduct manual Machining prototype work.
Set up and consistently and accurately program Mazak machine mills and lathes.
Without direct supervision, able to manufacture necessary tooling, jigs, and fixtures and can perform cylindrical grinding.
Work efficiently and hold very close tolerances (+/-.
005 ) as a minimum for the lowest level requirement, and (+/-.
0001) for higher level fabrications.
Select or adapt standard procedures or equipment, using fully applicable precedents.
Fabricate specialized tooling for unique machining operations.
Construct components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions.
Receive initial instructions, equipment requirements, and advice from supervisor or engineer as needed.
Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment.
Extract and compile a variety of engineering data from field notes, manuals, lab reports; process data, identifying errors or inconsistencies, selecting methods of data presentation.
Provide recommendations for improving operations by recommending new equipment, methods, or materials for accomplishment of tasks, consistent with applicable regulatory guidance and safety SOPs.
Provide guidance to Engineers and Machinist in machining principles and order of operations.
Provide technical support for engineers working in such areas as research, design, development, testing, or manufacturing process improvement.
QualificationsHigh School diploma or equilvalent is required at a minimum.
Must be able to operate and maintain conventional lathes and machinery.
Proficiency in the use of SolidCAM Software to program test items.
Perform assignments that are not completely standardized or prescribed.
Basic to Intermediate level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPointAbility to communicate effectively with all levels of employees and outside contactsStrong interpersonal skills and good judgment with the ability to work alone or as part of a teamMust maintian certification/license to operate Bowhead and Government vehiclesPhysical Demands:
Must be able to lift up to 50 pounds repetitivelyMust be able to stand and walk for prolonged amounts of timeMust be able to twist, bend and squat periodicallySECURITY CLEARANCE REQUIREMENTS:
Must be able to obtain a security clearance at the Secret level.
US Citizenship is a requirement for Secret clearance at this location.
#LI-DNI
Benefits:
Long Term Disability, Medical, Dental and Vision, Military Leave, Paid Holidays, Professional Development, Tuition Reimbursement, 401K, Employee Referral Program, Flexible Spending Accounts, Life InsuranceAbout the Company:
Bowhead / UIC Technical ServicesUIC Government Services (UICGS) and its Bowhead family of companies are a division of Ukpeagvik I upiat Corporation (UIC), an Alaskan Native Corporation (ANC).
UIC is one of the largest ANC's in Alaska, and combined with UICGS/Bowhead, we offer a wide variety of services to defense and civilian government agencies that reach across multiple disciplines, the U.
S.
, and the world.
With our excellent management team and great range of services in the areas of Information Technology, Logistics & Marine, Manufacturing & Products, Program Management and Operations, and Systems & Technology, we perform over 250 contracts worldwide with innovative business solutions in areas such as engineering, maintenance services, manufacturing, information technology, program support, logistics/base support, and procurement.
Collectively, our 3,500
employees of the Bowhead family of companies, UIC, UIC Government Services, UIC Government Construction, and UIC Commercial remain committed to delivering quality results to ensure our customers' success.
Headquartered in Virginia, we are a fast-growing, multi-million-dollar corporation consistently recognized as one of the top 25 8(a) certified small business companies for government contracting.
Company Size:
2,500 to 4,999 employeesIndustry:
Real Estate/Property ManagementFounded:
1999Website:
https:
//www.
bowheadsupport.
com/.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
